LCR Meter 6360 Series
6363/6364/6365/6366/6367

LCR Meter 6360 Series|6363/6364/6365/6366/6367
Features
  • Test Frequency 10Hz-1MHz
  • Output Impedance 100Ω
  • Open Circuit/Short Circuit
  • Meter Mode
  • List Mode
  • 7.0" TFT, 800×480 color screen
  • Four Parameters Displayed Simultaneously
  • Comparator/BIN
  • Basic Accuracy ±0.05%
  • Using  Graphical Analysis by PC Link
  • RS-232、Handler、LAN、USB Host 、Handler、GPIB

MICROTEST 6367 LCR Meter offers a frequency range of 10Hz to 1MHz. It can measure parameters such as |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), and C (capacitance). It supports communication interfaces such as RS-232, Handler, LAN, USB Host, GPIB, and can store test results and data via USB. With the optional PC connection software, it also enables sweep analysis capabilities. MICROTEST 6367 is an excellent choice for basic impedance measurements of electronic components.

Specifications

Selection

Model 6360 Series
Selection 6363 6364 6365 6366 6367

Frequency

Range

1mHz-

20kHz

0.1Hz-

100kHz

10Hz-

200kHz

10Hz-

500kHz

10Hz-

1MHz

SPEC

Frequency Setting Continuity
Frequency Output Accuracy ±0.01%
Frequency Resolution 5 Digits 
Basic Accuracy ±0.05% 
AC Drive Level Test Signal Voltage Level

10mV - 2Vrms

Voltage Minimum Resolution 1mV
DC Drive Level Test Signal Voltage Level 10mV - 2V
Voltage Minimum Resolution 1mV
Output Impedance 100Ω
Measurement Mode Meter mode, list mode
Measurement Parameters

|Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C

Test Time  AC / DC test speed Max. 8mS 

Measurement Parameters

Parameters Range
|Z| 0.001mΩ - 99.999MΩ
R, X 0.001mΩ - 99.999MΩ
|Y| 0.1nS - 99.999S
G, B 0.1nS - 99.999S
θ ±0.001 ~ ±180.000deg
Cs, Cp 0.01pF - 9.9999F
Ls, Lp 0.1nH - 99.999KH
D 0.00001 - 9.9999
Q 0.1 - 9999.9
Δ -9999% - 9999%
Rdc 0.001mΩ - 99.999MΩ

SYSTEM

  Measurement Circuit Series/Parallel
  Correction Open Circuit/Short Circuit
 Indicator PASS/FAIL
  Test Range Automatic/Lock
  BIN
  List Mode 8 sets
  Bulit-in Storge 128 sets
  USB Host Storge LCR setting documents, list mode setting document
   Trigger Test Auto, manual, RS-232, GPIB, Handler
   Power Supply Voltage:98-132Vac or 195-264Vac  
(Switchable)
Frequency:47-63Hz
  Power consumption 30VA
   Environment Temperature:10℃-40℃
Humidity:20-90%RH
  Dimension 358x148x343 mm (W*H*D)
  Weight 3 Kg
  Interface RS-232、Handler、LAN、USB Host
Display Color Screen, 7" TFT (800*480)