Impedance Analyzer

MICROTEST 6632/6632S Impedance Analyzers utilize automatic balanced bridge measurement technology, providing a wide frequency range of 10Hz to 50MHz for measuring impedance characteristics of components and materials.

They support both Meter mode and sweep analysis mode, presenting measurement results in either numerical or graphical formats. Optionally, you can purchase equivalent circuit analysis functions for three-component/four-component impedance analysis. These analyzers offer communication interfaces including LAN, USB Host, USB Device,GPIB(Optional), and RS-232, making them compatible with automation equipment or human-machine interfaces (PLC).
Impedance Analyzer
All Products
Impedance Analyzer Capacitor Analyzer Benchtop LCR Meter DC Bias Current Test System
Impedance Analyzer 6632 Series|1/3/5/10/20/30/50MHz
Impedance Analyzer 6632 Series
1/3/5/10/20/30/50MHz
  • Frequency range: DC, 10Hz to 1/3/5/10/20/30MHz/50MHz
  • Basic accuracy up to ±0.08% (typical ±0.05% )
  • Automatic Level Control (ALC)
  • Output impedance 25Ω/100Ω, switchable
  • Support meter mode and list mode, sweep mode
  • Built-in DC Bias voltage ±12V
  • Ultra-high measuring speed < 3ms
  • Open circuit/short circuit/load correction function
  • Comparator function
  • BIN classification function
  • Built-in the Permeability-μr
  • Built-in the Dielectric constant-εr
MICROTEST 6632 Impedance Analyzer offers a wide frequency range of 10Hz to 50MHz for measuring the impedance characteristics of components and materials. The measured parameters include |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (Susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), C (capacitance), ESR (equivalent series resistance), ε (relative permittivity), and μr (relative permeability). It supports both Meter mode and Sweep Analysis mode, allowing measurement results to be displayed in numeric or graphical formats. It supports LAN/USB Host/USB Device/RS-232/GPIB (Optional) communication interfaces, making it compatible with automation equipment or human-machine interfaces (PLC).
Inquiry Compare
Impedance Analyzer 6632S Series|1/3/5/10/20/30/50MHz
Impedance Analyzer 6632S Series
1/3/5/10/20/30/50MHz
  • Frequency range: DC, 10Hz to 1/3/5/10/20/30MHz/50MHz
  • Basic accuracy up to ±0.08% (typical ±0.05% )
  • Equivalent Circuit Analysis
  • Automatic Level Control (ALC)
  • Output impedance 25Ω/100Ω, switchable
  • Support meter mode and list mode, sweep mode
  • Built-in DC Bias voltage ±12V
  • Ultra-high measuring speed < 3ms
  • Open circuit/short circuit/load correction function
  • Comparator function
  • BIN classification function
  • Built-in the Permeability-μr
  • Built-in the Dielectric constant-εr
MICROTEST 6632S Impedance Analyzer offers a wide frequency range of 10Hz to 50MHz for measuring the impedance characteristics of components and materials. Support Equivalent Circuit Analysis function to analyze the impact of parasitic components on impedance. The measured parameters include |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (Susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), C (capacitance), ESR (equivalent series resistance), ε (relative permittivity), and μr (relative permeability). It supports both Meter mode and Sweep Analysis mode, allowing measurement results to be displayed in numeric or graphical formats. It supports LAN/USB Host/USB Device/RS-232/GPIB(Optional) communication interfaces, making it compatible with automation equipment or human-machine interfaces (PLC).
Inquiry Compare

Compare